| Content Prompt: Hilin Technology C50, D50 series micro air pumps are launched |
Convergence of ingenuity, new luxury products, shining above the world! After two years of information collection and technical research, Chengdu Hilin Technology finally officially launched a new type of intelligent micro pumps-C50 series and D50 series, which will be launched for the market from January 2019. These two products break through the limitations of mechanical operation of traditional pumps. The start, stop and flow rate of the pump can be controlled through the touch screen and signal control terminal, which greatly improves the stability and reliability of the pump and strengthens a variety of self-protection functions. It can operate safely and stably under heavy load conditions, which can be said to be an important beginning of industrial pumps on the road of miniature intelligence.The C50 series and D50 series use the same mold in structure, and the appearance of the two models is the same. Both include basic type, remote control type, touch control type and top configuration type. The internal structure and internal circuit are different. The C50 series is only suitable for pumping and vacuuming, while the D50 series can be used as a dual-function pump, which can be used for both pumping,vacuuming, blowing and pumping. In addition, the two pumps are basically the same in other functions, such as working indicator light, remote control, touch screen control, speed control function, alarm function, diversified quick-change connectors, self-protection function, status memory function, and RS- 485 communication function, etc.
C50/D50 basic type, power interface, 24V DC, the red wire is connected to the positive pole, and the black wire is connected to the negative pole; equipped with a working status indicator, the working status of the pump can be intuitively reflected through the prompt of the indicator; one-key-to-toggle start and stop switch , corresponds to dial up "off" and dial down "on".
C50/D50 basic type, power interface, 24V DC, the red wire is connected to the positive pole, and the black wire is connected to the negative pole; equipped with a working status indicator, the working status of the pump can be intuitively reflected through the prompt of the indicator; one-key-to-toggle start and stop switch corresponds to dial up "off" and dial down "on".
C50/D50 remote control type, in addition to the basic indicator light and start-stop switch, it is also equipped with a remote control terminal from which the customer can control the start and stop of the pump from a remote place. Note: If you want to use the remote control function, the premise is that the start-stop switch on the pump panel should remain in the "on" state. The red wire and black wire of the control port are respectively connected to the remote control hardware switch. If the red wire is connected with the black wire, the pump will stop, and if the red wire is disconnected from the black wire, the pump will start.
C50/D50 touch control type, equipped with LCD display, directly display the pump speed. Through the LCD screen display button, touch the screen to control the start and stop of the pump, and adjust the motor speed, and then control the flow, vacuum, pressure, etc. At the same time, if the pump is abnormal, the screen will display the corresponding fault code according to the fault situation. Note: Touch operation requires a long press; it is strongly recommended to use with our company's matching power supply. The quality of the power supply may damage the pump or interfere with the normal operation of the pump.C50/D50 top configuration type, not only equipped with LCD touch screen speed control function, fault display function, but also equipped with remote frequency speed control function, remote voltage speed control function and RS-485 communication function, that is, besides the remote control and touch control functions, the top configuration type also supports frequency and voltage signal speed control and RS-485 communication functions. The motor running time, real-time speed, alarm code and occurrences can be output through the RS-485 serial communication interface.
As a customizable product, each type of product of C50 and D50 has different versions, corresponding to different versions, life, noise, reliability, parameter consistency, anti-electromagnetic interference, working environment temperature and other parameters. The higher the version, the better the quality. At the same time, our company provides a wide range of customizable options, including stainless steel connectors, quick-change couplings, special media, special high and low temperature working environments, special control methods, special installation methods, special flow and pressure parameters, and special lifetime and other requirements in order to meet a wider range of customer needs.
